Universal Connector Automatic Washing Machine Inlet Tube Adapter

FEATURES:

• Installation method of inlet tube adapter of washing machine:
• Take out the accessories inlet tube automatic washing machine, find the end with inlet tube connector, then press down the slider to separate the inlet tube connector from the inlet tube. Loosen the four screws on the inlet tube joint evenly until the tap can be inserted. If the tap is too large, the bushing can be removed.
• Then loosen the plastic connector nut until about 3-4 turns of thread are exposed.
• Put the inlet tube joint on the tap, fasten the black washer inside the joint to the tap, and then fasten the screw with a screwdriver.
• Tighten the plastic connector nut until there is no leakage, and then connect the joint between the inlet tube and the inlet tube.
• Connect the other end of the inlet tube with the water inlet of the automatic washing machine and tighten the plastic nut, thus completing the installation.